Description
BluePrint 632 ProSeries Stroker Longblock, Fuel Injected
- 815 HP and 740 Ft/lbs Torque
- Compression Ratio: 11:1
- Aluminum Heads
- Hydraulic Roller Cam
- Forged Crank
- Forged Pistons
BLOCK:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.600″ Bore
- 1-Piece Rear Main Seal
- Tall Deck (Cyl Deck is Approx .400 taller / wider than OEM block)
ROTATING ASSEMBLY:
- New BluePrint Forged Crankshaft
- 4.750″ Stroke
- Forged H-beam 6.635″ connecting rods
- Forged Pistons
- Internal
CYLINDER HEADS:
- BluePrint Aluminum Cylinder Heads -PS8012
- 119cc chamber
- 2.30″ intake/1.88″ exhaust valves
- 358cc intake/125cc exhaust runners
- Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
- Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.
CAM SPECS:
- Cam Type: Roller
- .698 / .698 Lift
- 272 / 282 duration @ .050 – 110 degree LSA
ALSO INCLUDES:
- Holley Sniper Fuel Injection HOLLEY SNIPER 550-841
- Aluminum, single plane
- intake manifold
- MSD Pro Billet distributor
- Valve covers, oil pan and timing cover
- spark plugs
- spark plug wires
- Harmonic balancer
- Dyno test results shipped with engine
WARRANTY:
- 30 month / 50,000 mile
NOTES:
- Not for use in pollution controlled vehicles.
- This engine features .300 raised exhaust ports and .400 deck height increase over OEM.
- Must verify clearance of exhaust, shift linkage, steering components etc. before ordering.
| KEY SPECS | |
|---|---|
| MFG. Part # | PS6320CTF1 |
| Brand | BluePrint Engines |
| Crate Engine Type | Long Block |
| Engine Displacement | 632 cu. in. |
| Horsepower | 815 horsepower |
| Compression Ratio | 11.0:1 |
| Torque | 740 ft./lbs. |
| Camshaft Type | Hydraulic Roller Tappet |
| Cylinder Head Material | Aluminum |
| Piston Material | Forged Aluminum |
| Crankshaft Material | Forged Steel |
| Combustion Chamber Volume | 119cc |
| Camshaft Duration (.050 in) | 272° intake / 282° exhaust |
| Camshaft Lift (in) | .698 intake / .698 exhaust |
| Bore x Stroke (in) | 4.600″ x 4.750″ |
| Carburetor Included | No |
| Intake Manifold Included | Yes |
| Distributor Included | Yes |
| Valve Covers Included | Yes |
| Engine Balance | Internal |
| Cylinder Heads Included | Yes |
| Rear Main Seal Style | 1-piece |
| Throttle Body Included | Yes |
| Oil Pan Included | Yes |
| Timing Cover Included | Yes |
| Water Pump Included | No |
| Harmonic Balancer Included | Yes |
| Flexplate Included | No |
| Flywheel Included | No |
| Air Cleaner Included | No |
| Spark Plugs Included | Yes |
| Spark Plug Wires Included | Yes |
| Computer Included | No |
| Wiring Harness Included | No |
Reviews
There are no reviews yet.